bio photo

VCP-NV=EZ

It’s been 2 weeks now since I sat and passed the VCP-NV. Straight after the exam I went on holiday and on coming back I got straight back into work.

My background is working with VMware since Esx 2.x in 2005. In a more structured and career focussed way since 2011 when I did a great project to deploy 4 vBlocks with Linked vCenters. Since then I’ve worked on various virtualisation deployments, upgrades, support incidents (the joys of being on-call) and even a brief foray into setting up a Hyper-V environment for one customer!!!

I did the original ICM for VI3, but didn’t get round the sitting the exam. Very slack of me and something I won’t repeat. So to catch up and qualify to sit VCP4 I did the VMWN4 course to gen up but mainly to meet the requirements. I passed VCP4 a few years back and updated to VCP5 last summer. This year I got involved in a great project to deploy NSX as part of a new offering, so breaking some fresh ground and it really re-engergised my enthusiasm.

I was fortunate to do the ICM NSX 6.1 course in June. However I would say that if you’ve used NSX and are familiar with the major concepts then you will be a long way to knowing the VCP-NV Blueprint material

So what’s the point of the history lesson? Also some of you may be shouting “arrogance” or “clickbait” over the post’s title. (The EZ/Easy bit).

Well my point is I’ve been in IT since desktop support in 1996 through to now and I’ve tracerouted and configured some basic Cisco routers for remote access but never delved into other switch/router makes or done much more than route/ipconfig/arp before handing config or diagnosis on to dedicated network folks.

So armed with

  • Basic networking skills
  • Quite a few years of vSphere Standard and Distributed switches under my belt
  • Just the depth of route redistribution and protocols such as OSPF/BGP/IS-IS that is delivered in the ICM

    • I undertook the VCP-NV.

    So I studies to the blueprint, plus some rudimentary networkng knowledge and the nuances of SDN and I passed.

    So what is my summary?

  • It was a very poorly written exam. There were typos which could mislead you. There were also plenty of questions which in a real-life scenario you'd ask a quick clarifying question to remove ambiguity
  • I feel there was a big overlap in the blueprint of VCP-DCV material relating to VSS and VDS. So if you are already familiar with those then you've covered quite a bit of the blueprint with your existing knowledge
  • It's two to three weeks study, depending on your existing networking skills. e.g. if you have a CCIE/CCNA plus VCP-DCV then it will be a walk in the park!

    • So my point was that whilst I still get confused a bit with OSPF/BGP and “Not So Stubby Areas” (NSSA) I’m still comfortable with the material outlined in the blueprint from a depth enough to pass.

    If you know vSphere and know networking then I’d say GO FOR IT!